Department of Electrical & Avionics Engineering Introduction Head Of Department Message Programs Offered Mission Statement Faculty Program Educational Objectives (PEOs) Program Learning Outcomes (PLOs) Curriculum Salient Features of Department Laboratories

Department of Electrical & Avionics Engineering

Lights

Dr. Husan Ali

Assistant Professor

Ext: +92-57-9153-243

Email:[email protected]


Dr. Husan Ali

Assistant Professor

Dr. Husan Ali is an Assistant Professor of Electrical Engineering at Air University, Aerospace & Aviation Campus, Kamra, where he also served as Chair Department (2020–2025). He holds a PhD in Electrical Engineering from Northwestern Polytechnical University (NPU), Xi’an, China.

He has over 10 years of experience in teaching, research, and academic leadership, with significant contributions to launching undergraduate and postgraduate programs, securing PEC OBE accreditation, and establishing modern laboratories and research collaborations with industry. He is also a certified Program Evaluator (PEV) by the Pakistan Engineering Council (PEC).

His research focuses on power electronics, renewable and smart energy systems, and the application of artificial intelligence and machine learning for modeling, control, and optimization of energy systems. He has authored 30+ SCI-indexed journal publications and 20+ peer-reviewed conference papers, and has led multiple funded research and industrial projects as Principal Investigator. He has supervised numerous BS, MS, and PhD students and is committed to developing industry-ready engineers through outcome-based education and applied research.


Journal Papers
1. Muhammad Aseer Khan, Husan Ali, Dur-e-Zehra Baig, “Torque ripple mitigation of brushless direct current motors for electric vehicles using novel hybrid control technique of proportional-integral controller and deep reinforcement learning,” Measurement, vol. 273, 121139, Mar. 2026. 2. Muhammad Aseer Khan, Husan Ali, Dur-e-Zehra Baig, Fahad R. Albogamy, “BLDC motor’s speed and torque modelling through hybrid machine learning based approach of nonlinear autoregressive neural network with exogenous inputs (NARX-NN),” PLOS One, pp. 1-13, Nov. 2025. 3. Husan Ali, Sami Ullah Jan, Akhtar Ali, “Behavioural modelling for DC distributed energy system: A step towards sustainable energy systems,” Arabian Journal for Science and Engineering, pp. 1-21, Nov. 2025. 4. Muhammad Aseer Khan, Dur-e-Zehra Baig, Husan Ali, Fahad R. Albogamy, “Torque and Speed Prediction of a Brushless Direct Current Motor Using Nonlinear Autoregressive with Exogenous Inputs and Neural Network,” Scientific Reports, vol. 15, no. 27191, July 2025. 5. Muhammad Aseer Khan, Dur-e-Zehra Baig, Husan Ali, Fahad R. Albogamy, “Optimized System Identification (SI) of Brushless DC (BLDC) motor using Data-Driven Modeling Methods,” Scientific Reports, vol. 15, no. 8497, Mar. 2025. 6. Bakht Muhammad Khan, Abdul Wadood, Herie Park, Shahbaz Khan, Husan Ali, “An Innovative Fractional Order Derivative War Optimization Algorithm for Optimal Coordination of Directional Overcurrent Relays,” Fractal and Fractional, vol. 9(3), no. 169, Mar. 2025. 7. Bilal Ashraf, Husan Ali, Muhammad Aseer Khan, Fahad R. Albogamy, “EffNet: An Efficient One-Dimensional Convolutional Neural Networks for Efficient Classification of Long-term ECG Fragments,” Biomedical Physics and Engineering Express, vol. 11, no. 025041 Feb. 2025. 8. Bakht Muhammad Khan, Abdul Wadood, Shahbaz Khan, Husan Ali, Tahir Khurshaid, Asim Iqbal, Kai Chai Kim, “Analysis of War Optimization Algorithm in a Multi-Loop Power System Based on Directional Overcurrent Relays,” Energies, vol. 17, no. 22(5542), Nov. 2024. 9. Abdul Wadood, Ejaz Ahmed, Shahbaz Khan, Husan Ali, “Fraction order particle swarm optimization for parameter extraction of triple-diode photovoltaic models,” Engineering Research Express, vol. 6, no. 025316, April 2024. 10. Muhammad Aseer Khan, Muhammad Arqum Khan, Husan Ali, Bilal Ashraf, Shahbaz Khan, Dur-e-Zehra Baig, Abdul Wadood, Tahir Khurshaid, “Output Power Prediction of a Photovoltaic Module Through Artificial Neural Network,” IEEE Access, vol. 10, pp. 116160-116166, Nov. 2022. 11. Muhammad Aseer Khan et al. presented an efficient method for identifying a two-wheeled robot system using feed-forward neural networks, published in Electronics, Nov. 2022. 12. Muhammad Aseer Khan et al. developed a data-driven approach for modeling a nonlinear two-wheeled robot, published in Processes, March 2022. 13. Muhammad Saad et al. proposed a behavioral modeling approach for DC nanogrid-based distributed energy systems, published in Energies, Nov. 2021. 14. Muhammad Saad et al. introduced an improved algorithm for extracting AC impedance, published in Journal of Electrical Engineering & Technology, Aug. 2020. 15. Shahbaz Khan et al. analyzed and evaluated an 18-pulse autotransformer rectifier unit without an interphase transformer, published in Turkish Journal of Electrical Engineering and Computer Sciences, 2018. 16. Xiaohua Wu et al. designed a carrier-based double integral sliding-mode controller for class-D amplifiers, published in IEEE Access, Dec. 2018. 17. Haider Zaman et al. worked on reducing switching crosstalk and voltage oscillations in SiC MOSFET converters, published in Energies, Nov. 2018. 18. Shahbaz Khan et al. proposed a novel 24-pulse rectification system, published in IEEE Access, Oct. 2018. 19. Haider Zaman et al. developed a fixed-frequency sliding-mode controller for a fourth-order class-D amplifier, published in Electronics, Oct. 2018. 20. Muhammad Saad et al. introduced a dq-domain impedance measurement method for three-phase converters in distributed energy systems, published in Energies, Oct. 2018. 21. Husan Ali et al. presented behavioral modeling techniques for parallel and cascaded DC-DC converters, published in Journal of Circuits, Systems and Computers, 2018. 22. Husan Ali et al. analyzed small signal models of DC-DC converters using frequency response measurements, published in International Journal of Computer and Electrical Engineering, June 2018. 23. Haider Zaman et al. worked on reliability modeling of SiC-based multiphase synchronous boost converters, published in Journal of Circuits, Systems and Computers, 2018. 24. Shahbaz Khan et al. compared different 18-pulse rectifier unit topologies with harmonic current reduction, published in Energies, May 2018. 25. Shahbaz Khan et al. developed improved models for AC and DC impedance extraction in multi-phase rectifiers, published in Energies, Mar. 2018. 26. Haider Zaman et al. proposed a high-efficiency interleaved boost converter using SiC MOSFETs for aircraft applications, published in Journal of Power Electronics, Jan. 2018. 27. Husan Ali et al. introduced reduced-order identification and stability analysis methods for DC-DC converters, published in Journal of Power Electronics, March 2017. 28. Xiancheng Zheng et al. proposed a droop control-based bidirectional AC-DC converter for aircraft systems, published in Energies, Mar. 2017. 29. Xiancheng Zheng et al. worked on nonlinear behavioral modeling of DC-DC converters for distributed energy systems, published in Energies, Jan. 2017. 30. Dawar Awan et al. reviewed printed UWB antennas with band notch features, published in Journal of Pakistan Academy of Sciences, Mar. 2015. 31. Husan Ali, Xiancheng Zheng, Shahbaz Khan, Waseem Abbass, Dawar Awan, “Performance analysis of controller design for dc-dc buck converter using linear and non Linear technique,” Journal of Applied Mechanics and Materials, pp. 417-425, vols. 719-720, Jan. 2015.
Conference Proceedings
1. Laiba Rani, Iqra Zulfiqar, Ayesha Iqbal, Husan Ali, Tufail Muhammad, Muhammad Aseer Khan presented a machine learning-based data-driven model for DC-DC boost converters at ICET, Peshawar, Nov. 2025. 2. Muhammad Muteeb, Husan Ali, Ali Mujtaba Durrani, Dawar Awan proposed a scalable solution for optimized power management in CubeSats at ICETECC, Jamshoro, April 2025. 3. Ejaz Ahmed, Shahbaz Khan, Abdul Wadood, Husan Ali, Babar Sattar Khan introduced a hybrid optimization approach for reducing fuel cost in thermal power plants at ICTIS, Pakistan, April 2024. 4. Abdul Wadood, Shahbaz Khan, Bakht Muhammad Khan, Husan Ali, Zabd ur Rehman applied the Marine Predator Algorithm to improve directional overcurrent relays at ICEPE, Dec. 2021. 5. Ali Mutahir, Zhaohui Gao, Husna Ali, Haider Zaman, Adnan Ashraf, Boyan Sun developed a rapid control prototyping method for buck converters using MATLAB at ICCAIS, China, Oct. 2018. 6. Husan Ali, Huamei Liu, Xiancheng Zheng, Pengfei Gao, Haider Zaman validated behavioral modeling of three-phase AC-DC converters using frequency response techniques at IECON, China, 2017. 7. Shahbaz Khan, Xiaobin Zhang, Husan Ali, Bakht Muhammad Khan, Haider Zaman, Muhammad Saad proposed a method for AC impedance extraction in three-phase systems at IEEE ICSSE, Beijing, Aug. 2017. 8. Shahbaz Khan, Xiaobin Zhang, Husan Ali, Bakht Muhammad Khan, Haider Zaman, Muhammad Saad improved impedance extraction methods for three-phase diode rectifiers at IEEE ICSSE, Beijing, Aug. 2017. 9. Muhammad Saad, Yong-Feng Ju, Shahbaz Khan, Husan Ali, Bakht Muhammad Khan developed a functional model and stability analysis of an 18-pulse ATRU system at IEEE ICSSE, Beijing, Aug. 2017. 10. Xiancheng Zheng, Haider Zaman, Xiaohua Wu, Husan Ali, Shahbaz Khan designed a SiC MOSFET-based synchronous DC/DC boost converter at iEECON, Thailand, March 2017. 11. Xiancheng Zheng, Haider Zaman, Xiaohua Wu, Husan Ali, Shahbaz Khan implemented a fuzzy logic controller for voltage control of a three-phase inverter at iEECON, Thailand, March 2017. 12. Dawar Awan, Husan Ali, Shahid Bashir, Muhammad Asif proposed a size reduction technique for compact UWB antennas at IEEE ICMMT, Beijing, June 2016. 13. Haider Zaman, Xiancheng Zheng, Shahbaz Khan, Husan Ali, Xiaohua Wu developed a sliding mode current control method for Z-source DC-DC converters at IEEE IPEMC-ECCE Asia, May 2016. 14. Xiancheng Zheng, Husan Ali, Xiaohua Wu, Onai Kuseso, Shahbaz Khan, Haider Zaman introduced reduced-order identification for DC-DC converters at ICISE, Islamabad, Jan. 2016. 15. Onai Kuseso, Tsegazeab Shishaye, Xiaohua Wu, Husan Ali designed a matrix converter for integrating wind energy into microgrids at IEEE AFRICON, Ethiopia, Sept. 2015. 16. Husan Ali, Xiancheng Zheng, Xiaohua Wu, Shahbaz Khan, Muhammad Saad analyzed frequency response of DC-DC buck converters at IEEE ICIA, China, Aug. 2015. 17. Shahbaz Khan, Gao Zhaohui, Husan Ali, Kashif Habib, Izhar ul Haq performed comparative analysis of 18-pulse ATRU configurations at IEEE ESARS, Germany, Mar. 2015. 18. Husan Ali, Xiancheng Zheng, Xiaohua Wu, Shahbaz Khan, Dawar Awan proposed frequency-domain controller design for DC-DC buck converters at IEEE Conference, Islamabad, Jan. 2015. 19. Hafiz Muhammad Rehan Afzal, Husan Ali, Muhammad Asif improved BM3D image denoising using segmentation and edge detection at IEEE CISP, China, Oct. 2014. 20. Muhammad Asif, Husan Ali, Hafiz Muhammad Rehan Afzal, Tauseef Ahmed Siddiqui analyzed power optimization in fiber optic transmission systems at IEEE CISP, China, Oct. 2014. 21. Tianjiao Xie, Muhammad Asif, Husan Ali, Hafiz Muhammad Rehan Afzal studied chromatic dispersion compensation in optical systems at IEEE CISP, China, Oct. 2014. 22. Dawar Awan, Shahid Bashir, Safdar Nawaz Khan, Husan Ali enhanced gain performance of UWB antennas at IEEE IWAT, Germany, Mar. 2013. 23. Usman Habib, Mazhar Sher, Muhammad Aftab, Husan Ali designed an efficient MC-CDMA transceiver and analyzed its performance in fading channels at IEEE ISMS.

Copyright © Air University Kamra Campus.
All right reserved.